Heat Shrinkable Teflon Tubing is a kind of medical heat shrink tube made of polytetranitrogen plastic ethylene, with excellent electrical insulation, low dielectric constant, high flame retardant and self-lubrication performance: ultra-high temperature resistance and liquid resistance, corrosion resistance: physiological inert, can directly contact with human skin, mainly used for medical devices need high temperature performance occasions.


Product features
1. Strong acid and alkali resistance, wear resistance, voltage resistance
2. Bio-compatibility
3. High power shrinkage ratio, good insulation performance
4. Resistance to high and low temperature-80 to 260 C
5. It has shrinkage ratios of 1.7:1 &2:1 &4:1
|
Performance characteristic |
||
|
characteristic |
experimental method |
Typical performance |
|
density |
ASTM D792 |
2.12-2.17 g/cc |
|
hardness (D) |
- |
60D |
|
Tensile Strength (Mpa) |
ASTM 0638 |
27-35MPA |
|
elongation (%) |
ASTM 0638 |
280-400% |
Polytetrafluoroethylene heat shrinkable tube production technology
PTFE heat shrinkable tube has the characteristics of heat shrinkage, so it can be tightly coated on the surface of other workpieces, so that the workpiece has corrosion resistance, electrical insulation and anti-viscosity. Widely used in electrical, chemical, machinery, printing and other industries. It is reported that the maximum shrinkage rate of PTFE heat shrinkable tube is greater than 75%.
Made of dispersed PTFE resin processing, the principle is that PTFE is subjected to stress during processing to produce forced high elastic deformation, this deformation is reversible, low temperature makes it freeze, if reheated frozen forced high elastic deformation will gradually disappear and return to the original state.
Typical formulations for PTFE heat shrink tubes
Dispersion PTFE Resin 100(weight parts)
Extrusion aid 20-22
Production process
PTFE resin, extruder → mixing → storage → preforming → pushing → drying → sintering → cooling → Heat treatment → blowing → cooling → Product.
Production process parameters
The front part is the same as the ordinary PTFE tube.
Heat treatment: The process of quenching the dried and sintered pipe after further full sintering at high temperature, the temperature is 390℃±2℃, and the coolant is -5℃.
Blowing: At about 310℃, fill the compressed gas below 0.98MPa, the blowing rate is 200%-400%.
Main equipment: blowing machine, other and ordinary PTFE pipe same.
Hot Tags: PTFE heat shrink, China PTFE heat shrink manufacturers, suppliers, factory, Teflon Heat Shrink Tubing, Teflon Shrink Tubing, heat shrink tube, Ptfe Heat Shrink, Teflon Shrink Wrap, Ptfe Shrink Tubing
